Industrial automatic doors (shutters)

Industrial automatic doors (shutters)

The use of automatic roll-up doors (electric shutters) in industrial environments is one of the desirable options in factories and industrial environments due to the reduction of transfer time and the prevention of cold weather. Due to the wide entrance of industrial sheds and frequent and continuous traffic of vehicles such as trucks, forklifts, etc. The use of industrial roller shutter doors with industrial side motors (direct gearbox) is a standard option for installing this type of door. .

Installation of industrial roller shutters is different according to the dimensions and type of blades (weight of blades) and all installation methods are in accordance with European standards and are performed by professional and experienced technicians.

Industrial roller shutter motor

Suitable motors for industrial doors have arta-door.com different ranges in terms of speed and power. The power of industrial gearbox motors is from 250 N to 750 N and the speed of these motors is from 12.5 rpm (12.5 RPM) to 27 rpm (27 RPM).

Attributes:

• High speed and unlimited traffic

• Has emergency brake to prevent the door from falling

• Move up and down the system and stop

• Equipped with anti-collision system (Anticrash)

• Has high security to prevent thieves from entering

• Easy operation on opening and closing by remote, keys or communication devices such as mobile phones

• Silent operation and insulation when using foam blades

• Ability to install storage batteries for operation in the event of a power outage

The use of automatic industrial roller shutter doors is one of the most desirable options in industrial places such as factories due to its high speed in transportation and prevention of wastage of heating or cooling energy. Due to the fact that the entrances of industrial sheds are wide and the traffic of vehicles such as trucks, forklifts, etc. is very high, it is better to use the industrial automatic roller shutter door with industrial side motors whose gearbox is straight. Select to install.

Installation methods for industrial shutter automatic doors

Installation of automatic industrial roller shutter doors varies according to the dimensions of the shutter and the type of blades. Also, all installation methods must be in accordance with European standards and performed by professional and experienced technicians and specialists. There are several methods for installing industrial automatic rolling shutter doors, which are mentioned below:

• Installation with movable base system

• Installation with 3 motor bases

• Installation with gear system and chains

It should be noted that all these methods are selected according to the dimensions and weight of automatic doors.

All kinds of Artadar industrial roller shutter automatic motors arta-door.com

Industrial shutter automatic door motors have different types in terms of power and speed. For example: The power of the industrial side engine, which is a gearbox, is from 250 N to 750 N, the speed of which is from 12.5 rpm to 27 rpm, which you can compare to the place where the automatic door is installed. Select its engine as well.

Features of industrial automatic rolling shutter door

• High speed and the possibility of unlimited traffic

• Automatic door movement with bottom and top panel and stop

• The highest security in preventing the entry of thieves

• Equipping the industrial automatic shutter door with a barrier collision system

• Has an emergency brake feature to prevent the automatic door from falling

• It has the feature of being silent and insulating when using foam double-walled blades

• Functional easy closing and opening of automatic doors by remote or mobile phone

• Has the ability to install batteries to store energy during power outages