What is dent repair and how to do it yourself?

Vehicles owners suck several times because of no mistakes of theirs and suffer a loss due to dents. Somebody exclaimed that there are three things certain in life that is death, taxes and dents.

Vehicles owners suck several times because of no mistakes of theirs and suffer a loss due to dents. Somebody exclaimed that there are three things certain in life that is death, taxes and dents. He is right! For heaven’s sake! We are almost certain dents are not our mistake but we will suffer greatly not because it spoils the efficiency of the vehicle but we hate to see our vehicles in such pathetic condition. It is like wearing clothes that are neat and tidy. Riding such cars gives the same feeling for most car owners. Therefore dent repair, Savannah, GA becomes very important.

People often don’t wish to spend their hard earned money on repairs and services and they try to do it all by themselves. Let us see what you need to do dent repair all by yourself. You certainly need the following things unless you have other ideas as you should go through the job in a different manner other than it is explained in this article. Here goes the list like this,

Dent removal kit
Plunger
Aluminum foil
Canned air
Air duster
Dent pulling tool
Block of wood
Lighter
Hair dryer
Soft cloth
Hammer

Remember that they work very well when the dents are small and you need not hire professional. But you might require professional if you find the dents are damages are severe and you cannot handle. Therefore, inspect the dents and find out if you can do it all by yourself. If you think you can fix it up all yourself then collect all the above mentioned tools so that you can achieve your goal without any trouble.

Use Heat: Before using this method cover your hands with protective gloves as you may get your hands burnt. For this method you need aluminum foil, cigarette lighter, canner air. The method is simple, hold the foil right over the dent and use the lighter for half a minute to one minute to heat the foil. After heating it immediately flip a can of compressed air and spray the liquid all over the area. Make sure it covers the foil area properly. The sudden change in the temperature help the metal change its shape and you will achieve your goal. This method is also known as paint-less dent repair. Wipe off with a soft cloth.

In auto repair Savanna, GA they use suctioning method than any other method to remove the dents. They have ready kit popular known as dent removal kit and it is equipped with all the tools necessary for the dent repair. It includes a suctioning pump and dent pulling tool. When the dent is pulled up you may need a hammer and wooden piece to bring to the original shape as it may pop little higher than necessary. Therefore fix it up using hammer and wooden piece at the bottom of the metal to achieve good results. This method is easy but you may have to spend little bit more time compared with other two methods.