Where are your bicycle needs oiling?

A Story by moxiaoxiao

Oil to a bicycle, you can really just looking for movement of parts, that is, moving metal parts in contact with each other. To use the light, bicycle lubricants, do not use your home from the garage to find the kind of dirty oil. Oil will quickly evaporate if it is too thin, you can not remain active; if it is too thick, it will stay on top, glue a lot of dust.- cycling jersey sets

Pay particular attention to the following sections:

Chain: the chain is a major drive components on the bike, but also the most in need of care, and most places require frequent oiling. If you're in dusty or muddy environments cycling, the chain should be cleaned regularly.- bicycle t shirts

Transmission: Your front derailleur and rear derailleur is shifting toggle chain parts. They consist of numerous small movement parts, also includes two guide wheels. You want to keep them clean and lubricated so they do not stick together or become stiff. When pedaling speed, check the transmission operation is normal, then use lubricating any moving parts, including the installation of the turning point.

Brake lines and speed lines: These lines are responsible for delivering your brakes and shifting behavior. Because if they did not receive timely lubrication and rust or adhesions, you will not be able to successfully stop or change gears, and even a little too. This is a major problem. Check them regularly, especially when you're riding in dusty or humid environment, a few drops of re-lubrication.-Cycling Socks

Brake and gear shift knob: They on the handlebars, the brake and shift key parts. In their turn the adjusting nut on the point and drip 1-2 drops of oil, guaranteed to work. Then, wipe off the excess oil to prevent dust absorption.
Brakes: the brakes (installed on your front and rear wheels in) above, you can see any moving parts on a few drops of oil. If the turning point easy to find, you can pinch under the brake levers, a closer look at where to turn. The relative motion of the metal parts need lubrication where places are. Be very careful, do not let the oil droplets to the brake block. Otherwise, it can not effectively brakes.

Pedal: Pedal crank connected in place a few drops of oil. Similarly, let the oil on to the rotating part.