Fendt Vario 700 S4 1001 Crossgate Lever Calibration Guide

A Story by car

This instruction show you guide on how to calibrate 1001 Crossgate Lever for Fendt Vario 700 S4 tractor.

Related Contents:

FENDT Fendias 2024 Diagnostic software

Procedures:
    Apply the hand brake
    Switch on ignition.
    Press to confirm any existing errors displayed in the instrument cluster
    Press to display the first main menu level
    Press until symbol A flashes
    Press to display the second main menu level
    Press until symbol A flashes
    Press to display the auxiliary spool valve menu level
    Press until symbol A flashes
    Press to be able to enter the calibration code
    Press and enter code 1001
    Confirm with
    Release crossgate lever �' it centers automatically
    Confirm with
    Push and hold the crossgate lever fully right (with the spring)
    Confirm with
    Push and hold the crossgate lever fully left (with the spring)
    Confirm with
    Push and hold the crossgate lever fully forwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully backwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully right (with the spring)
    In this position, push and hold the crossgate lever fully forwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully right (with the spring)
    In this position, push and hold the crossgate lever fully backwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully left (with the spring)
    In this position, push and hold the crossgate lever fully backwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully left (with the spring)
    In this position, push and hold the crossgate lever fully forwards (with the spring)
    Confirm with
    Push and hold the crossgate lever fully right (not with the spring)
    Confirm with
    Push and hold the crossgate lever fully left (not with the spring)
    Confirm with
    Push and hold the crossgate lever fully forwards (not with the spring)
    Confirm with
    Push and hold the crossgate lever fully backwards (not with the spring)
    Confirm with
    If calibration is error-free, OK appears and the calibration values are stored
    Note:
        The values are not applied until after a key reset.
        Wait at least 60 seconds before switching the ignition ON.
    If incorrect values are detected or the conditions were not met, ERROR appears
    1001 Calibration code
    FXX Fault code