how you can do Teh2 candi interface self test.

Tech2 for GM Diagnostic Scanner performs with GM, SAAB, OPEL, SUZUKI, ISUZU, Holden. New version GM Tech2 is no require to connect with Computer or desktop.Autonumen.com is usually a reputable China OBD2 tools supplier giving Vehicle Truck Diagnostic Tool, OBDII EOBD JOBD Scanner, ECU Chip Tunning, Auto Important Programmer/Locksmith Tool. A self test will help to check effectively Candi module is nicely connected or not. Right here will be the step-by-step instruction on tips on how to do Teh2 candi interface self test.

1) Connect CANdi interface for the car via 12 PIN ALDL connector

two) Run and total all GM Tech 2 stand-alone self-test. Disconnect CANdi interface when run Tech2 scan tool self test.

3) Run VCI self test. When the VCI self-test fails, replace VCI module. Disconnect CANdi module when run VCI self test

4) Connect the CANdi module to an existing VCI module via DLC cable, and connect VCI module with car. Make certain there is great connection amongst scanner and automobile. Verify that the LED on the CANdi module is flashing.

five) Immediately after effectively connected with vehicle and Tech2 key unit, energy up the GM Tech2 scan tool, the scanner is flashing. Computer software update process will show on the screen.

6) Browse to “Tool Options” menu, select “F9 CANdi Diagnostics” choice

7) Two options accessible below CANdi Diagnostics menu: POST Test and Self Test

8) Initial run a POST Test. The CANdi POST result is applied to establish in the event the module has any difficulties for the duration of the software upgrade or start-up sequence.

9) Then run Self Test, here is the CANdi Self Test Outcomes figure

NOTE:

When the CANdi module is connected and an error screen happens, disconnect the CANdi module from the Tech two and carry out the test once more.