how to fix gas hot water heater?

Having issues with your gas hot water heater? Don’t worry! Here, we explain various problems and offer troubleshooting tips. If these don’t work out, asking experts for aid is the best solution!

Are you having trouble with your gas hot water heater? One of the most efficient types of hot water systems is the one that is gas-based. It not only offers fast heating but also reduces the energy bill drastically. That is why gas hot water systems have gained such popularity. However, there are several issues that might lead to the malfunctioning of the gas heater. For that, you need to know some handy tips. Keep in mind that not all problems can be solved by DIY suggestions. To make sure that you don’t cause any additional damage, you must call the experts.

Different issues that can interfere with the smooth functioning of the gas hot water heater

There are various problems that can disrupt the working of the gas hot water. Here is a list of issues and potential solutions that can help you out. However, it is vital to keep in mind that contacting the professionals is a better decision if you are not too sure.

Problem: Condensation

Did you know that condensation can occur when the gas hot water system is in use? The two main causes include the cool surface of the flue pipe and the cold air supply. It mainly occurs when cold water enters the appliance for the very first time. The only solution is to ensure that the incoming water temperature is not too cold. Moreover, there are several symptoms that can alert you to the issue. These include �" red and black spots present on the burner, water leaking, water present on the heater top.

Problem: Lack of hot water

The main function of the gas hot water system is to provide hot water. If that doesn’t happen, you need to check out the issue immediately. Firstly, you need to check the gas supply line and the main gas valve. Make sure that there are no obstructions. If there are no issues in these areas, you can look into other factors. One of them is the inability of the tank to hold water compared to water usage. In that case, the solution is to get a new hot water system that is much more appropriate to the family's hot water needs.

Problem: Sooting

If you are experiencing massive sooting in the flue vents and gas chamber of the hot water system, that's a valid concern. It may be due to the absence of air in these places. However, if all the parts have soot, then there are various causes that can explain the problem. For instance, it can be due to the usage of the wrong part. The solution is simple �" be more aware when you are using the gas-based hot water system. Moreover, it can also be due to high gas pressure. In that case, you will need to contact the utility company and experts!

Problem: Inability of the pilot light to stay on

Another issue you might face with the gas hot water system is the pilot light not staying on. There are various factors that can contribute to this problem. For instance, it can be due to a lack of gas. That is why you must check in with the utility company. See if the gas pressure is low or if there is no gas at all. Moreover, you must also notice if the pilot light button stays depressed completely when pushing it. If not, then the issue could be with the button. No matter the cause, you must get in touch with experts to resolve the issue.

Problem: Water becomes too hot

Are you panicking about the scalding water emerging from the hot water system? We understand the panic, especially if you have children in the house. Too much hot water can lead to scalding and severe burns if you are not careful. The main cause of this particular issue is defects or inaccurate settings of the thermostat. You need to check out the thermostat immediately. Keep in mind that the higher the temperature, the hotter the water will come out. That is why most manufacturers keep it at 120 degrees. See if the temperature has been increased and make the necessary adjustments. If it is defective, you need to get a new one as soon as possible.

Problem: Emergence of black water

The appearance of black or rusty coloured water is a major problem of the gas-based hot water system. It is mainly due to the degradation of the anode rod. The metal present within the anode rod oxidizes instead of the steel covering of the tank. It is to protect the tank from leaking. However, when the metal degrades fully, the rusting of the tank occurs. It eventually leads to the colouring of the water. The only solution, in this case, is to replace the anode rod. For that, you must opt for professional assistance.

Looking for expert aid for your gas hot water heater? Contact us now!

There are various problems that can interfere with the working of your gas hot water heater. While there are some DIY tips that you can follow, sometimes, they might not work. Moreover, it is quite dangerous to work on a gas heater if you have natural gas or propane leaking. The consequences are far too dangerous for an amateur to handle. For this, you must take the assistance of professionals.

Hot Water Sydney is one of the best plumbing service providers. Our team of skilled plumbers and technicians with years of expertise can handle various issues related to the gas hot water system. Moreover, we use the latest tools and devices for the job. Furthermore, we are available round the clock and charge attractive price rates. Just give us a call, and we will be there to assist you right away!