FORGED STEEL CHECK VALVE MANUFACTURER IN USAA Story by SpecialityvalveSVR Global is the reputed Forged Steel Check Valve Manufacturer in USA and supplies good quality valves to marine industries.FORGED
STEEL CHECK VALVE MANUFACTURER IN USA SVR Global is the reputed FORGED STEEL CHECK VALVE MANUFACTURER IN USA and supplies good quality valves to marine industries, wastewater industries and chemical industries in Oklahoma, Rhode Island and Maryland. A forged steel check valve is made from forged steel, which is a process that involves heating and shaping steel under high pressure. strength and durability, making it suitable for high-pressure and high-temperature applications. This valve works by allowing fluid to flow in one
direction while preventing backflow in the opposite direction. The valve has a
disc or ball that moves freely within the valve body, and is held in place by a
spring or other mechanism. When fluid flows in the desired direction, the disc
or ball moves away from the valve seat, allowing the fluid to pass through. If
there is backflow, the disc or ball is pushed back onto the valve seat,
preventing the fluid from flowing in the opposite direction. They are available
in a range of sizes and pressure ratings, and can be used in high-pressure and
high-temperature applications. PARTS ·
Body ·
Hinged disc ·
Hinge pin ·
Seat ·
Stem ·
Bonnet TYPES ·
Swing
check valve: A swing check valve has a hinged disc that swings open to allow
fluid to flow in one direction and closes to prevent backflow in the opposite
direction. ·
Lift
check valve: A lift check valve has a disc that lifts off the valve seat to
allow fluid to flow in one direction, and closes to prevent backflow in the
opposite direction. ·
Dual
plate check valve: A dual plate check valve has two plates that are hinged
together and move in opposite directions to allow fluid to flow in one
direction, and close to prevent backflow. ·
Tilting
disc check valve: A tilting disc check valve has a disc that tilts to allow
fluid to flow in one direction and closes to prevent backflow. ·
Ball
Forged steel Check Valve: A ball forged steel check valve incorporates a
ball-shaped disc to control the flow of fluid through the valve. ·
Pressure
seal Forged steel Check Valve: A pressure seal forged steel check valve is a
type of check valve designed to handle high pressure and high temperature
applications. ·
Non slam
swing Forged steel Check Valve: A non-slam swing forged steel check valve is a
type of check valve designed to prevent water hammer and reduce noise and
vibration during operation.
INDUSTRIES ·
Chemical Industry ·
Pulp and paper Industry ·
Marine Industry ·
Mining Industry ·
Power Generation Industry ·
Oil and Gas Industry ·
Nuclear Industry ·
Petrochemical Industry APPLICATIONS ·
Oil and
gas industry: Forged steel check valves are commonly used in the oil and gas
industry to control the flow of fluids in pipelines and other equipment, and to
prevent backflow. ·
Petrochemical
industry: Forged steel check valves are used in the petrochemical industry to
control the flow of fluids in chemical processing and refining, and to prevent
backflow. ·
Power
generation: Forged steel check valves are used in power generation
applications, such as steam and gas turbines, to control the flow of fluids and
prevent backflow. ·
Water and
wastewater treatment: Forged steel check valves are used in water and
wastewater treatment applications to control the flow of fluids and prevent
backflow. ·
Mining
industry: Forged steel check valves are used in the mining industry to control
the flow of fluids and prevent backflow in pipelines and other equipment. FEATURES
ADVANTAGES ·
Durability:
Forged steel check valves are made using a process that involves heating and shaping
steel under high pressure, resulting in a strong and durable valve that can
withstand high pressures and temperatures. ·
Corrosion
resistance: Forged steel check valves are resistant to corrosion and can
withstand harsh environments, making them ideal for use in applications where
fluids are corrosive or abrasive. ·
Tight
seal: The pressure seal design of forged steel check valves ensures a tight
seal and prevents leaks or fugitive emissions, providing an extra level of
safety and reliability. ·
Wide range
of applications: Forged steel check valves are commonly used in a wide range of
applications, including oil and gas, power generation, petrochemicals, water
and wastewater treatment, and more. ·
Various
designs: Forged steel check valves are available in various designs, such as
swing check, ball check, and lift check, to meet different application
requirements. ·
Low
maintenance: Due to their durability and resistance to corrosion, forged steel
check valves require minimal maintenance, resulting in lower overall costs and
downtime. •
Prevents
backflow ·
Mechanically very easy to
use. Body Material- Cast
Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron,
Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L,
F91), duplex and super duplex STEEL [ F51, F53, F55 ] Forged Steel A105, F22,
F51, F53, F55, F91, F304, F316) Size-
½” " 80”
© 2023 Specialityvalve |
StatsAuthor
|